Fluke ScopeMeter 190 Series, Programming Reference Manual

Page: 12 / 120

Page 3.1
=============================================================
3. COMMAND REFERENCE
CONVENTIONS
** Page layout used for each command **
- Header
Each command description starts on a new page with a header
for quickly finding the command. This header indicates the
command name and the two-character header used for the
command syntax. Example:
===========================================================
AUTO SETUP AS
-----------------------------------------------------------
Where AUTO SETUP is a descriptive name for the command
(this is no syntax!),
and AS are the first two characters used for
the command syntax (not the complete
syntax).
- Purpose:
Explains what the command does or what it is used for.
- Command Syntax:
Shows the syntax for the command. Parameters are separated
by commas. Commands are terminated by <cr> (carriage
return).
- Response Syntax:
Shows the format of the response from the ScopeMeter.
Responses are terminated by <cr> (carriage return).
Each Response Syntax starts with the <acknowledge>
response, followed by the query response if the syntax
relates to a query.
- Example:
This is an example QBASIC program which shows how you can
use the command. The example may also include some other
commands to show the relation with these commands.
The following two comment lines (start with ’) successively
indicate the beginning and the end of an example program.
’***************** Begin example program ****************
’****************** End example program *****************