manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Programming Reference Manual

Share
Download
Fluke ScopeMeter 190 Series Programming Reference Manual Download Page 82

’                            Page 3.55
’
    ’***** <Sample.Bytes> bytes <invalid> value
    Sample.Byte = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck2% = SumCheck2% + Sample.Byte
    IF (Signed.Samples = 1) AND (Sample.Byte >= 128) THEN

Sample.Byte = - (256 - Sample.Byte)

    END IF
    Invalid& = Sample.Byte
    FOR i = 2 TO Sample.Bytes
        Sample.Byte = ASC(MID$(Resp$, Resp.Count + i - 1, 1))
        SumCheck2% = (SumCheck2% + Sample.Byte) MOD 256
        Invalid& = Invalid& * 256 + Sample.Byte
    NEXT i
    IF (Signed.Samples = 0) OR (Invalid& < CLimit) THEN

Invalid.Value = Invalid& * Y.Resol

’Positive value

    ELSE

’Negative value

Invalid.Value = - ((CMaxim - Invalid&) * Y.Resol)

    END IF
    Resp.Count = Resp.Count + Sample.Bytes
    PRINT "Invalid sample value   ="; Invalid&; Invalid.Value
    PRINT #4, "Invalid sample value   ="; Invalid&; Invalid.Value
    ’
    ’***** 2 bytes <nbr_of_samples>
    Sample.Byte = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck2% = (SumCheck2% + Sample.Byte) MOD 256
    Nbr.Of.Samples = Sample.Byte
    Sample.Byte = ASC(MID$(Resp$, Resp.Count + 1, 1))
    SumCheck2% = (SumCheck2% + Sample.Byte) MOD 256
    Nbr.Of.Samples = Nbr.Of.Samples * 256 + Sample.Byte
    IF MinMax.Samples = 1 THEN     ’Min/Max pair of samples
       Nbr.Of.Samples = Nbr.Of.Samples * 2
    END IF
    IF MinMax.Samples = 2 THEN     ’Min/Max/Ave samples
       Nbr.Of.Samples = Nbr.Of.Samples * 3
    END IF
    Resp.Count = Resp.Count + 2
    PRINT "Number of samples      ="; Nbr.Of.Samples
    PRINT #4, "Number of samples      ="; Nbr.Of.Samples
    ’
    ’***** <Sample.Bytes> bytes <sample_value>’s
    ’
DIM Sample.Value(Nbr.Of.Samples) AS LONG
    FOR i = 1 TO Nbr.Of.Samples

’Sample loop

        Sample.Byte = ASC(MID$(Resp$, Resp.Count, 1))
        SumCheck2% = (SumCheck2% + Sample.Byte) MOD 256

IF (Signed.Samples = 1) AND (Sample.Byte >= 128) THEN
   Sample.Byte = - (256 - Sample.Byte)
END IF

        Sample.Value&(i) = Sample.Byte

IF Sample.Bytes > 1 THEN

’More sample bytes

    FOR j = 2 TO Sample.Bytes

Sample.Byte = ASC(MID$(Resp$, Resp.Count + j - 1, 1))
SumCheck2% = (SumCheck2% + Sample.Byte) MOD 256
Sample.Value&(i) = Sample.Value&(i) * 256 + Sample.Byte

    NEXT j
END IF

Summary of Contents for ScopeMeter 190 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands