manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Programming Reference Manual

Share
Download
Fluke ScopeMeter 190 Series Programming Reference Manual Download Page 113

                             Page C.1
    =============================================================
                   APPENDIX C          WAVEFORM DATA
    -------------------------------------------------------------

    The waveform data that is received from the QW (Query
    Waveform) query, consists of the following data.

    <trace_admin>,<trace_samples>

    where,

    <trace_admin> = #0<block_header><block_length><trace_result>
                    <y_unit><x_unit><y_divisions><x_divisions>
                    <y_scale><x_scale><y-step><x_step><y_zero>
                    <x_zero><y_resolution><x_resolution><y_at_0>
                    <x_at_0><date_stamp><time_stamp><check_sum>
      where,

      <block_header> = <binary_character>
                       Possible values: 144 and 0.
                       The value 0 is returned when also the
                       <trace_samples> data block is requested.

      <block_length> = <unsigned_integer>
                       This value gives the number of bytes that
                       are transmitted after the <block_length>
                       and before the <check_sum>.

      <trace_result> = <binary_character>
        If bit 0 is set (decimal value 1) the trace is a direct
          result of a trace acquisition.
        If bit 1 is set (decimal value 2) the trace is a result
          of the TrendPlot function (recording numerical results).
        If bit 2 is set (decimal value 4) either the trace itself
          is an envelope trace, or an envelope trace is available.
        If bit 3 is set (decimal value 8) either the trace itself
          is a reference trace, or a reference trace is available.
        If bit 4 is set (decimal value 16) either the trace itself
          is a mathematics trace, or a mathematics trace is
          available.
        Note: This <trace_result> information is not available in
          all instrument types/versions.

      <y_unit> =       <unit>

      <x_unit> =       <unit>
                       The <unit> is a <binary_character> which
                       value represents the unit:
                              None                =  0
                              <Volt>              =  1
                              <Ampere>            =  2
                              <Ohm>               =  3
                              <Watt>              =  4
                              <Farad>             =  5
                              <Kelvin>            =  6
                              <seconds>           =  7

Summary of Contents for ScopeMeter 190 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands