manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Programming Reference Manual

Share
Download
Fluke ScopeMeter 190 Series Programming Reference Manual Download Page 67

’                            Page 3.47
Interpret.Admin:
    Resp.Count = 1

’Byte counter for Resp$

    SumCheck1% = 0              ’Sumcheck byte for Resp$
    ’
    ’***** Interpret the <trace_admin> waveform data bytes
    ’***** in the Resp$ string (see appendix C).
    ’
    ’***** 2 bytes <trace_admin> block trailing : #0
    IF MID$(Resp$, Resp.Count, 2) <> "#0" GOTO Wave.Error
    Resp.Count = Resp.Count + 2
    ’
    ’***** 1 byte <block_header>
    nb = ASC(MID$(Resp$, Resp.Count, 1))
    IF nb <> 128 AND nb <> 0 GOTO Wave.Error
    Resp.Count = Resp.Count + 1
    ’
    ’***** 2 bytes <block_length>
    Block1.Length = ASC(MID$(Resp$, Resp.Count, 1)) * 256
    Block1.Length = Block1. ASC(MID$(Resp$, Resp.Count + 1, 1))
    Resp.Count = Resp.Count + 2
    ’
    ’***** 1 byte <trace_result> : 0, 1, or 2
    Trace.Result = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck1% = SumCheck1% + Trace.Result
    IF Trace.Result < 0 OR Trace.Result > 2 GOTO Wave.Error
    Resp.Count = Resp.Count + 1
    ’
    ’***** 1 byte <y_unit>
    Y.Unit = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck1% = SumCheck1% + Y.Unit
    Resp.Count = Resp.Count + 1
    PRINT "<y_unit>          ="; Y.Unit,
    ’
    ’***** 1 byte <x_unit>
    X.Unit = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck1% = SumCheck1% + X.Unit
    Resp.Count = Resp.Count + 1
    PRINT "      <x_unit>          ="; X.Unit
    ’
    ’***** 2 bytes <y_divisions>
    Sample.Byte = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck1% = SumCheck1% + Sample.Byte
    Y.Divisions = Sample.Byte * 256
    Sample.Byte = ASC(MID$(Resp$, Resp.Count + 1, 1))
    SumCheck1% = SumCheck1% + Sample.Byte
    Y.Divisions = Y.Div Sample.Byte
    Resp.Count = Resp.Count + 2
    PRINT "<y_divisions>     ="; Y.Divisions,
    ’
    ’***** 2 bytes <x_divisions>
    Sample.Byte = ASC(MID$(Resp$, Resp.Count, 1))
    SumCheck1% = SumCheck1% + Sample.Byte
    X.Divisions = Sample.Byte * 256
    Sample.Byte = ASC(MID$(Resp$, Resp.Count + 1, 1))
    SumCheck1% = SumCheck1% + Sample.Byte
    X.Divisions = X.Div Sample.Byte

Summary of Contents for ScopeMeter 190 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands