manualshive.com logo in svg

Fluke ScopeMeter 190 Series, Programming Reference Manual

Share
Download
Fluke ScopeMeter 190 Series Programming Reference Manual Download Page 75

’                            Page 3.51
’
    FOR i = 0 TO 2
        SumCheck1% = (SumCheck1% + ASC(MID$(Resp$,Resp.Count+i,1))) MOD 256
    NEXT i
    nb = ASC(MID$(Resp$, Resp.Count, 1))
    IF nb >= 128 THEN

nb = - (256 - nb) * 256

’Negative value

nb = nb + ASC(MID$(Resp$, Resp.Count + 1, 1))

    ELSE

nb = nb * 256

’Positive value

nb = nb + ASC(MID$(Resp$, Resp.Count + 1, 1))

    END IF
    exponent(6) = ASC(MID$(Resp$, Resp.Count + 2, 1))
    YXvalue#(6) = nb
    Resp.Count = Resp.Count + 3
    ’*****
    ’* Further calculation after ’Signed.Samples’ determination
    ’*****
    ’***** 8 bytes <year><month><date>
    FOR i = 0 TO 7
        SumCheck1% = (SumCheck1% + ASC(MID$(Resp$,Resp.Count+i,1))) MOD 256
    NEXT i
    Year$ = MID$(Resp$, Resp.Count, 1)
    Year$ = Year$ + MID$(Resp$, Resp.Count + 1, 1)
    Year$ = Year$ + MID$(Resp$, Resp.Count + 2, 1)
    Year$ = Year$ + MID$(Resp$, Resp.Count + 3, 1)
    Month$ = MID$(Resp$, Resp.Count + 4, 1)
    Month$ = Month$ + MID$(Resp$, Resp.Count + 5, 1)
    Day$ = MID$(Resp$, Resp.Count + 6, 1)
    Day$ = Day$ + MID$(Resp$, Resp.Count + 7, 1)
    Resp.Count = Resp.Count + 8
    PRINT "<date_stamp>      = "; Year$ + "-" + Month$ + "-" + Day$;
    ’
    ’***** 6 bytes <hours><minutes><seconds>
    FOR i = 0 TO 5
        SumCheck1% = (SumCheck1% + ASC(MID$(Resp$,Resp.Count+i,1))) MOD 256
    NEXT i
    Hours$ = MID$(Resp$, Resp.Count, 1)
    Hours$ = Hours$ + MID$(Resp$, Resp.Count + 1, 1)
    Minutes$ = MID$(Resp$, Resp.Count + 2, 1)
    Minutes$ = Minutes$ + MID$(Resp$, Resp.Count + 3, 1)
    Seconds$ = MID$(Resp$, Resp.Count + 4, 1)
    Seconds$ = Seconds$ + MID$(Resp$, Resp.Count + 5, 1)
    Resp.Count = Resp.Count + 6
    PRINT "    <time_stamp>      = "; Hours$+":"+M":"+Seconds$
    ’
    ’***** 1 byte <check_sum>
    Check.Sum% = ASC(MID$(Resp$, Resp.Count, 1))
    IF Check.Sum% <> (SumCheck1% MOD 256) GOTO Wave.Error
    Resp.Count = Resp.Count + 1
    PRINT "<check_sum> ="; Check.Sum%; " & ";
    PRINT "SumCheck1 MOD 256 ="; SumCheck1% MOD 256
    RETURN
Wave.Error:
    PRINT "Waveform admin error at byte  :"; Resp.Count
    PRINT "Waveform decimal byte value   ="; ASC(MID$(Resp$,Resp.Count,1))

Summary of Contents for ScopeMeter 190 Series

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands