Fluke ScopeMeter 190 Series, Programming Reference Manual

Page: 91 / 120

Page 3.63
=============================================================
REPLAY RP
-------------------------------------------------------------
Purpose:
To select and setup the Replay analysis mode and to select
a replay screen (see Syntax 2) or to query the total
number of valid replay screens (see Syntax 1).
Note: applicable for the Fluke 199 and 196 families
Command Syntax 1:
RP<cr>
Command Syntax 2:
RP <screen_index><cr>
where,
<screen_index> = 0 to -99 : Replay screen number
0 = newest (current) screen
-99 = oldest screen
Response Syntax 1:
<acknowledge><cr><nr_of_screens><screen_index><cr>
where,
<nr_of_screens> = 0 to 100 : number of valid screens
0 = no valid screens
<screen_screen> = 0 to -99 : index of the actual screen
Response Syntax 2:
<acknowledge><cr>
As a result, the Replay function is started and the replay
screen <screen_index> is shown on the instrument.
Notes: - When <screen_index> is omitted, nothing happens.
- Replaying screens works only in the SCOPE mode.
Tips: - Use the QP, QS, QM, QW commands for information
about the replayed screen and measurements.
- Send the AT command to return to disable the Replay
function and return to normal (running).
Example: