6.15. Reset Factory Settings
FLIR Detection
Latitude
The current location north or south of the equator given in angle degrees, minutes and
seconds.
Longitude
The current location west or east of the prime meridian passing through the Royal Ob-
servatory in Greenwich (UK) given in angle degrees, minutes and seconds.
Altitude
The current altitude in meters above or below the mean sea level as de ined by the
WGS84 geoid used by GPS.
Exit
Return to the superior menu.
6.15 Reset Factory Settings
Options Menu (p.
ä
More Options (p.
)
ä
Advanced Options (p.
ä
Maintenance (p.
)
ä
Reset Factory Settings
This command (Figure
140
, p.
132
) discards all changes you made to any of the FLIR
identiFINDER R300’s settings and reestablishes the settings made at the factory.
The password (see
2.2.7
, p.
46
), if any, is reset to the factory setting as well.
Figure 140.
Reestablishing the factory default settings
Settings and Commands
Reset
Discard all your personal settings and return to the factory default settings.
132
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
