FLIR Detection
10. Connecting via Satellite Phone
Chapter 10
Connecting via Satellite Phone
The FLIR identiFINDER R300 can also transmit data using a Bluetooth™ DUN connection with a
satellite phone. In order to utilize this method of transport, the FLIR identiFINDER R300 must be
paired to a Bluetooth-to-Serial converter that is connected to the satellite phone and con igured to
properly connect to the phone and a reachback server.
10.1
Pairing the FLIR identiFINDER R300 to a Satellite Phone
Currently, the Iridium™ 9505A satellite phone with Iridium data adapter and Parani SD1000
Bluetooth-to-Serial adapter have been veri ied with the FLIR identiFINDER R300 but other satellite
phones and adapters may also work. Contact our service department for more information.
Ô
To pair with the satellite phone
…
1. Connect the Parani SD1000 Bluetooth-to-Serial adapter connected to the Iridium 9505A
satellite phone.
2. Using a pin, press and hold the adapter’s recessed Pairing button for two seconds then release.
While the LED is lashing in a triple lash pattern, the adapter is discoverable.
3. Place the device in the vicinity of the FLIR identiFINDER R300. The maximum range is 10 m
(33 ft) but could be less depending on the environment.
4. From Dose Rate mode on the FLIR identiFINDER R300, press the right button to access the
Options menu then navigate to Bluetooth Periphery and select it:
Options Menu (p.
ä
More Options (p.
)
ä
Advanced Options (p.
ä
Connectivity Options (p.
)
ä
Bluetooth Periphery
Note: If the ”SPP Enabled” screen appears then you must irst disable Bluetooth SPP
mode at:
Options Menu (p.
ä
More Options (p.
ä
Bluetooth SPP (p.
)
ä
Bluetooth SPP Status (p.
141
)
ä
Bluetooth SPP
Settings
Once Bluetooth SPP is disabled (if necessary), return to Bluetooth Periphery using the
irst part of this step before continuing.
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
223