
6.21. Send Identi cation
FLIR Detection
A summary of the chosen identi ication is shown (Figure
146
, p.
138
) so you can verify your choice
and choose other data if necessary.
The spectrum analyzed to compute the identi ication results is always included with the sent
data.
Figure 146.
Sending Data: Identi ication summary
Settings and Commands
Choose
Choose another record for sending (Figure
145
, p.
137
).
Send
Start sending the chosen data.
Several settings (see
9
, p.
219
) are required to send data. If any one of these settings is
missing, you will be noti ied (Figure
147
, p.
139
) and routed to the appropriate screen
to enter the missing setting.
We recommend specifying the required settings before sending data (see
6.24
, p.
149
and
6.27
, p.
153
). The most convenient way to do so is via the web interface (see
,
p.
During the transfer of data you will be kept posted about the progress of the transmission
steps (Figure
148
, p.
139
).
After all data are successfully transferred, you will be noti ied (Figure
149
, p.
140
) and can
acknowledge the message with
OK
.
+
,
-
,
Accept
,
Cancel
Edit values, see
2.2.3
, p.
37
for details.
138
identiFINDER
®
R300/en/2014.4(13623)/Feb2015