7.4. Using the Network Connection
FLIR Detection
Figure 198.
End of the installation
Ô
To remove the driver software
…
1. Open the Windows System Control Panel.
2. Open
Program\Programs and Features
.
3. Select the
FLIR RNDIS Driver
from the list by clicking its entry.
4. Click
Uninstall
and follow the instructions given on-screen.
7.4
Using the Network Connection
When you connect the FLIR identiFINDER R300 to an appropriately con igured computer (see
7.3
,
p.
171
), it will show its addresses (Figure
199
, p.
178
).
Figure 199.
Valid addresses of the FLIR identiFINDER R300 after a connection to a computer was established
One address contains the serial number of your FLIR identiFINDER R300, the other is an IP address
according to the current settings (see
6.26
, p.
152
). To access the FLIR identiFINDER R300’s web in-
terface, simply point your web browser to one of the given addresses, for example to the IP address
Not all computers can use the address comprising the instrument’s serial number. Please use
the IP address in this case.
178
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
