2.8. Resetting the FLIR identiFINDER R300
FLIR Detection
Figure 61.
Low Power Dose Rate Mode
If the battery is completely empty, another message (Figure
62
, p.
66
) will appear accompanied by
a characteristic sound (Figure
60
, p.
65
).
Figure 62.
Battery is empty.
You should switch off the instrument.
Please connect the FLIR identiFINDER R300 to an external power source (see
11.1
, p.
229
).
2.8
Resetting the FLIR identiFINDER R300
The FLIR identiFINDER R300 can be reset by performing a normal shut down–start up cycle.
All your custom settings remain unchanged by this procedure. To revert the instrument to
the factory defaults, use
Reset Factory Settings
(
6.15
, p.
132
).
66
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
