2.5. Starting Up the FLIR identiFINDER R300
FLIR Detection
2.5
Starting Up the FLIR identiFINDER R300
Ô
To start up the FLIR identiFINDER R300
…
1. Ensure that the instrument is clean and free of visible damages.
2. Ensure that the battery is charged or connect the instrument to an external power source
(see
11.2
, p.
230
)
3. Press and hold
I
for a moment.
The red LED lashes.
If your variant is equipped with a neutron detector, the blue LED lashes as well.
4. Release the key.
Wait a moment while the FLIR identiFINDER R300
• Identi ies itself (Figure
53
, p.
62
),
Figure 53.
Powering up the FLIR identiFINDER R300: Product identi ication
• goes through start-up procedures (Figure
54
, p.
63
),
• initializes the software (Figure
55
, p.
63
).
If the time of the FLIR identiFINDER R300’s internal clock is unreasonable, most proba-
bly caused by the battery being empty for some weeks, you will be asked to set the clock
(see
6.10
, p.
125
).
5. The FLIR identiFINDER R300 switches to the dose rate display (Figure
56
, p.
63
) and is ready
for operation.
62
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
