7.3. Preparing the USB Network Connection on a Computer
FLIR Detection
Figure 193.
FLIR RNDIS driver installer
Figure 194.
Installation warning
4. You will be asked whether you want to allow the installation of software (Figure
194
, p.
176
).
Please click
Yes
.
5. Follow the instructions given on-screen (Figure
195
, p.
177
).
If a FLIR RNDIS driver is already installed on your PC, you will be guided through the
deinstallation before the installation begins.
The installation will inish in a few moments (Figure
196
, p.
177
).
6. Stop the mass storage connection from the FLIR identiFINDER R300 to your computer (see
7.2
, p.
170
).
Whenever you connect a computer and a FLIR identiFINDER R300 which is not in the USB mass
storage mode, the FLIR identiFINDER R300 identi ies itself as an RNDIS device. A computer running
Microsoft Windows Windows 7 detecting the device checks whether the device is known and will
report the detection of new hardware if not (Figure
197
, p.
177
).
176
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
