| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 14 of 88 |
The keypad
The keypad on the DZM has various modes as described below. Refer to the page number in brackets for further
information about each key's function.
When the 'Main Screen' displays, each key has a quick key function:
MENU
key
Press to enter the menu system to configure DZM settings (page 16)
MARK
key
Press to send current GPS position data (page 31)
AFF
key
Press to start and stop Automated Flight Following (AFF) (page 38)
DISTRESS
key
Press and hold for 15 seconds to send a distress signal (page 49)
ENTER
and
POWER
key
Press to call a phone number that has been entered (page 20)
Press to answer an incoming call (page 22)
Press and hold to switch the DZM off or on (page 9)
DIAL CEL
key
Press to enter a phone number to dial from the cell modem (page 20)
DIAL SAT
key
Press to enter a phone number to dial from the satellite phone (page
20)
ISO PH
key
Press to isolate (mute) audio between the DZM and the cell and
satellite phones (page 42)
CANCEL
key
Press to terminate a call, undo last action or delete text or numbers
entered on the display
SPD CELL
key
Press to select a speed dial number to call from the cell modem (page
22)
SPD SAT
key
Press to select a speed dial number to call from the satellite phone
(page 22)
AUX MUTE
key
Press to mute any auxiliary audio devices (page 43)
When the 'Menu Screen' displays, the following key functions are available:
ARROW
keys
Press the arrow keys to navigate through the menu options
Use the arrow keys to increase or decrease audio volume during a call
QUICK
keys
Press the 3 key to move directly to the first item in a menu list
Press the 9 key to move directly to the last item in a menu list
ENTER
key
Press to select a menu item
Press to save modified settings for a selected menu item
CANCEL
key
Press to exit the menu system and return to the 'Main Screen'
MENU
key
Press to deselect a menu option, cancel any unsaved settings and
return to the previous screen
