| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 41 of 88 |
Setting satellite phone audio volume
Satellite phone audio is audio from the satellite phone to the DZM. Satellite phone audio may be adjusted on both
the DZM and the connected satellite phone.
NOTE!
Do not adjust volume on the satellite phone handset to above halfway or an undesirable echo will be
heard by the party on the other end of the phone link.
STEP 1 - Altering satellite phone audio volume on the DZM:
From the 'Audio Menu', use the arrow keys to navigate to 'Sat
Volume'.
Press the
ENTER key to select. The 'Sat Volume' screens
displays.
Press the
or
arrow keys to increase sat phone
volume.
OR
press the
or
arrow keys to decrease sat phone
volume. 0 is the lowest volume. 100 is the highest volume. 10 is
the default volume.
Press the
ENTER key to save. You are returned to the
'Audio Menu'.
STEP 2 - Altering satellite phone audio volume on the handset:
Adjust audio volume using the 'Up' and 'Down' buttons to the left
of the LCD display on the Iridium 9505/A or 9555 handset.
For best performance, set the volume on the satellite phone
handset to 3.
NOTE!
Undesirable echo occurs when volume on the handset
is set to above halfway.
Setting cell modem audio volume
Cell modem audio is audio from the cell modem to the DZM. Cell modem audio volume may be adjusted on the
DZM.
