Flightcell DZM Operation Manual Download

Page: 62 / 88

| Flightcell

DZM Operating Manual | Firmware v2.00

Page 62 of 88 |

Finding messaging destination addresses

The messaging destination addresses for some commonly known tracking providers are detailed below. If your

tracking service provider is not listed here, contact your provider directly to request the appropriate messaging

destination addresses.

Tracking Provider

Cellular Network

Satellite Network

SMS Destination

SBD Destination

Guardian MapTracks

Not available

[email protected]

tcp.gways1.com:9100

TracPlus

New Zealand Telecom:

- 027 222 1169

Australia:

- +61 427 767958

[email protected]

202.191.51.6:11001
202.191.51.158:11002

Flight Explorer

(using SatCom Direct 3PDI)

Not available

[email protected]

63.144.240.225:10800

Configuring satellite messaging destination

The recipient destination for messages sent over the satellite network must be specified. This is critical to the

delivery of tracking, mapping and other data to appropriate parties. Messages are usually sent to a central

ground data server, which follows pre-configured rules to distribute any received data appropriately.

Your Iridium satellite phone can use 2 different transmission modes to send data; Short Burst Data (SBD) and

Short Message System (SMS). Only the recipient destination for SMS messages may be specified from the DZM.

Contact your satellite network service provider to configure the recipient destination for SBD messages.

Summary of Contents for DZM

























































































Search results

Summary of Contents for DZM

Reviews:

Related manuals for DZM

Brands by name

Popular brands

Flightcell DZM, Operation Manual

Search results

Summary of Contents for DZM

Reviews:

Related manuals for DZM

Brands by name

Popular brands