Flightcell DZM Operation Manual Download

Page: 76 / 88

| Flightcell

DZM Operating Manual | Firmware v2.00

Page 76 of 88 |

Configuring other Flightcell

DZM advanced setup

features

This section describes how more advanced DZM settings may be configured using the 'Setup Menu'.

Refer to "Using DZM common setup features" on page 45 for further information about configuring common

setup features using the 'Setup Menu'.

Advanced system settings are configured from the ‘System Setup’ sub-menu. Navigate to the ‘System Setup’ sub-

menu following the steps on page 54.

Setting satellite phone type

To send audio and data over the satellite network, the DZM must be set up so that it knows a satellite phone is

connected and the type of satellite phone connected to the DZM must be specified. Note that the type of satellite

phone connected to the DZM cannot be specified via the menu system. This can only be configured by installing

the correct DZM firmware for the type of phone that will be used in your installation. DZM Firmware versions

available include support for Iridium 9505 and 9505A, and 9555 satellite phones with the latest firmware

releases. Ensure the Iridium phone type listed in the Sat Type menu matches your phone type. If not, a DZM

firmware upgrade will be required. Refer to Appendix A for information related to upgrading you DZM.

Specifying satellite phone type (or no satellite connection):

From the ’System Setup’ sub-menu, use the arrow keys to

navigate to 'Sat Type'.

Press the

ENTER key to select. The 'Sat Type' screen

displays.

Using the arrow keys, navigate to the connection type required

(e.g. 'Iridium 9505/9505A').

If the DZM is not connected to a supported satellite phone, select

No Data Connection

Press the

ENTER key to save.

NOTE:

For the 9505 model phone, the latest phone firmware version is LAC0307. For the 9505A model phone,

the phone firmware versions operating may be LAC0307, ISO5004 or ISO6004. To check the firmware version of

Iridium satellite phones, type

*#91#

into the phone. Compatible satellite phones can be supplied by Flightcell

International.

Summary of Contents for DZM

























































































Search results

Summary of Contents for DZM

Reviews:

Related manuals for DZM

Brands by name

Popular brands

Flightcell DZM, Operation Manual

Search results

Summary of Contents for DZM

Reviews:

Related manuals for DZM

Brands by name

Popular brands