| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 68 of 88 |
Switching power up messaging on or off:
From the ’Tracking Setup’ sub-menu, use the arrow keys to
navigate to ’Power up Message’.
Press the
ENTER key to select. The Power up Message’
screen displays.
Using the arrow keys, navigate to the power up mode required
(e.g. ‘On’).
Press the
ENTER key to save.
Enabling and disabling automated flight following (AFF)
You may define whether or not the automated flight following (AFF) function may be used on the aircraft or
vehicle. By default the AFF function is disabled.
NOTE!
To use AFF, the keypad type in use on your DZM must be specified as civilian and must have AFF
displayed on key 2. Refer to "Specifying keypad type" on page 77 for further information about keypad
selection.
Enabling and disabling AFF use:
From the ’Tracking Setup’ sub-menu, use the arrow keys to
navigate to ’AFF Settings’.
Press the
ENTER key to select. The 'AFF Settings' screen
displays.
Using the arrow keys, navigate to the AFF setting required (e.g.
'On').
Press the
ENTER key to save
OR
press the
MENU or
CANCEL keys to abort the
change.
