Flightcell DZM Operation Manual Download

Page: 18 / 88

| Flightcell

DZM Operating Manual | Firmware v2.00

Page 18 of 88 |

Altering a menu setting

Press the

arrow keys to increase a setting (e.g. a

volume or level setting).

Press the

arrow keys to decrease a setting (e.g. a

volume or level setting).

Saving a menu setting

Press the

ENTER key to save modified settings for a selected menu item.

Aborting a menu setting

If a menu setting has not been saved:

Press the

MENU key to abort the change and return to the previous screen.

press the

CANCEL key to abort the change and exit the menu system.

Exiting the menu

Press the

CANCEL key to exit the menu system and return to the 'Main Screen'.

When in the menu system, the DZM will automatically return to the Main Screen after 20 seconds

unless another key is pressed.

Summary of Contents for DZM

























































































Search results

Summary of Contents for DZM

Reviews:

Related manuals for DZM

Brands by name

Popular brands

Flightcell DZM, Operation Manual

Search results

Summary of Contents for DZM

Reviews:

Related manuals for DZM

Brands by name

Popular brands