| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 20 of 88 |
Making and answering calls
Making a call using manual dial
You may manually enter phone numbers into the DZM to make a call.
STEP 1 - Selecting cell modem or satellite phone:
From the 'Main Screen', press the
DIAL CEL key to make a manual call from the cell modem. The 'Dial
Cell modem' screen displays.
OR
press the
DIAL SAT key to make a manual call from the satellite phone. The 'Dial Sat Phone' screen
displays.
STEP 2 - Entering the phone number:
Using the 0 to 9 keys, enter the phone number.
Press and hold the
MENU key to enter the international
dialing prefix "+" (for GSM and Iridium networks).
Use the
CANCEL key to delete the last digit entered if
required.
The phone number entered will display.
Press and hold the CANCEL key to abort the call completely.
STEP 3 - Calling the number:
Press the
ENTER key to call the number displayed. The
phone status on the 'Main Screen' displays
Calling
. When the call
is connected the phone status displays
On Call
. If the DZM
matches the phone number dialed to an existing number in the
phonebook, then the contact’s name will appear underneath the
phone status instead of the number.
NOTE!
It may take up to 30 seconds for the satellite phone to
respond.
