| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 79 of 88 |
From the ’System Setup’ sub-menu, use the arrow keys to
navigate to 'LCD Inversion'.
Press the
ENTER key to select. The 'LCD Inversion' screen
displays.
Using the arrow keys, navigate to the mode required (e.g. 'On').
Press the
ENTER key to save.
Restoring factory default settings
The DZM factory default settings may be restored if required.
Restoring to factory default settings:
From the ’System Setup’ sub-menu, use the arrow keys to
navigate to 'Factory Reset'.
Press the
ENTER key to select. The 'Factory Reset' screen
displays.
Press the
ENTER key to reset factory settings.
OR
press the
MENU key to leave settings unchanged.
You are returned to the 'Setup Menu'.
