| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 52 of 88 |
Configuring GPS tracking
Whether you plan to use the DZM to transmit GPS data manually or automatically, you need to do the following:
Setting up your tracking service
Notify your tracking service provider of:
The
serial number
of your DZM. Refer to "Identifying firmware version and serial number" on page 47
for further information about how to identify the serial number of your DZM
The
IMEI identification number
of your satellite phone handset. This is a 16 digit number located on a
sticker under the Iridium battery
Request from your tracking service provider:
The
satellite phone SMS destination address
The
satellite phone SBD destination address
The
cellular SMS destination address
Refer to "Finding messaging destination addresses" on page 62 for messaging destination addresses for
some known tracking providers.
Setting up your satellite network service
If you will be using SBD messaging to transmit GPS position data:
Notify your satellite network service provider of the
IMEI identification number
of your satellite phone
handset. This is a 16 digit number located on a sticker under the Iridium battery
Notify your satellite network service provider of the
satellite phone SBD destination address
. This
should be provided by your tracking service provider or refer to "Finding messaging destination addresses"
on page 62.
You will also need to agree a contract for the SBD service with your satellite network service provider
If you will be using SMS messaging to transmit GPS position data:
Check your satellite network service provider supports SMS messaging
You will also need to agree a bulk SMS message plan with your satellite network service provider
