| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 32 of 88 |
STEP 2 - Manually transmitting GPS data:
From the 'Main Screen', press the
MARK quick key to send
current GPS position data to an authorized recipient destination.
The 'Position Marked' screen displays, before returning to the
'Main Screen'. A notification message will display confirming the
network (satellite or cellular) the GPS data was transmitted on.
Automatically transmitting GPS position
Using the DZM, your current GPS position may be automatically transmitted to an authorized recipient. Automatic
transmissions may be based on one or many of the factors below:
A specified time interval
Changes in heading
Aircraft takeoff and landing, based on aircraft speed or, for a helicopter, lifting and lowering the collective
combined with takeoff and landing speed
NOTE!
The DZM requires a valid GPS lock in order to automatically transmit GPS position data. Refer to
"Using GPS antenna diagnostics" on page 55 for further information on GPS lock.
Enabling, disabling and suspending automated GPS tracking
You may determine whether or not automated GPS tracking is activated on the aircraft or vehicle. By default, GPS
tracking is enabled unless manually overridden.
Enabling, disabling or suspending GPS tracking:
From the 'Tracking Menu', use the arrow keys to navigate to
'Enable/Disable'.
