| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 46 of 88 |
Setting backlight brightness
The DZM LCD display backlight brightness may be adjusted. Set a specific brightness level, or use an external
signal from the aircraft's instrument light control.
The DZM supports 0-5VAC and 0-28VDC external control signals.
Setting the backlight brightness:
From the 'Setup Menu', use the arrow keys to navigate to
'Backlight Brightness'.
Press the
ENTER key to select. The 'Backlight Brightness'
screen displays.
Using the arrow keys, navigate to the mode required (e.g. 'Ext
Control[0-28 VDC]').
Press the
ENTER key to save. You are returned to the
'Setup Menu'.
Setting backlight mode
The DZM LCD display backlight mode may be customized.
Backlight mode options:
The following LCD display backlight mode options are available:
Always On
- The backlight will remain on at all times when the DZM is on.
Keypad Timeout
- The backlight will switch on only when a key is pressed. It will remain on for 15 seconds.
Always Off
- The backlight will remain off at all times.
Setting the backlight mode:
From the 'Setup Menu', use the arrow keys to navigate to
'Backlight Mode'.
Press the
ENTER key to select. The 'Backlight Mode' screen
displays.
Using the arrow keys, navigate to the mode required (e.g.
'Keypad Timeout').
