| Flightcell
®
DZM Operating Manual | Firmware v2.00
Page 66 of 88 |
Setting preferred messaging device
If you have a cellular modem installed and your tracking service provider can support data sent via the cellular
network, set the cell modem as the preferred device. Setting the preferred device to Cell Phone will instruct the
DZM to use the cell modem in preference for sending position reports, but it will also use the sat device when
there is low or no cell signal. If the preferred device is set to Sat Phone, the DZM will only ever use the Sat
phone and will never use the cell modem to send a position report.
Specifying the preferred messaging device:
From the ’Tracking Setup’ sub-menu, use the arrow keys to
navigate to 'Preferred Device'.
Press the
ENTER key to select. The 'Preferred Device'
screen displays.
Using the arrow keys, navigate to the preferred device required
(e.g. 'Cell modem').
Press the
ENTER key to save. You are returned to the
'Setup Menu'.
Enabling Iridium SBD transmission
Setting up transmission via the satellite network:
From the ’Tracking Setup’ sub-menu, use the arrow keys to
navigate to 'SBD Enable'.
Press the
ENTER key to select. The 'SBD Enable' screen
displays.
Using the arrow keys, navigate to the mode required (e.g. 'On').
Press the
ENTER key to save.
If SBD transmission is disabled, all position data sent via your
satellite phone will be transmitted by SMS.
