Fisher-Rosemount 3095FT, Manual

Page: 95 / 184

4-47
Using the Model 3095FT User Interface Software
Logs
Collect Configuration
A configuration is required for importing data into Flow-Cal. During
this procedure, the Model 3095FT User Interface prompts for
confirmation, then retrieves a configuration log from the connected
Model 3095FT. This log is not available for viewing or editing.
For additional Flow-Cal information, see Appendix F.
Logs
Save to Archive
Anytime new logged data is retrieved from a transmitter, the data
should be saved to archive, and/or printed to a file. This selection saves
the retrieved data to the archive, saving the data to the same filename
as the software tag. This procedures saves all three types of logged
data. The Model 3095FT User Interface checks the file before saving,
and only saves logged data that has not yet been saved.
Logs
Print to File
After a new report is generated (see above), use the print to file option
to save the data (see Figure 4-40). Use the “Save File as Type” window
to store this data as an ASCII file (*.txt) or as a comma separated
values file (*.csv). After printing this information to a file, the data can
be sent to a printer or retrieved into a spreadsheet program (not
provided).
Note that only the active window is printed to a file. To save all three
types of files, select each window (click the window with the mouse or
press Ctl-Tab to switch active windows), and save each set of data
under different file names.
NOTE
If a filename is selected that already exists, the Model 3095FT User
Interface appends the logs to the end of the file. The software does not
check to verify whether the data has already been saved to file, or
whether different types of logs are being printed to the same file.
FIGURE 4-40. Print to File Screen.
30
95
-30
950
04
4
3
095
-30
9
5
001
9