Fisher-Rosemount 3095FT, Manual

Page: 52 / 184

Rosemount Model 3095FT HART Flow Transmitter
4-4
ESTABLISH
COMMUNICATIONS Figure 4-2 and Figure 4-3 illustrates the two methods for connecting a
computer to a Model 3095FT.
Connect a Personal
Computer to a Model
3095FT
1. Connect the computer to the Model 3095FT. See Warning above,
and Figure 4-1 and Figure 4-2.
a.Connect one end of the 9-pin to 9-pin cable to the HART
communications port on the personal computer.
b.Connect the other end of the 9-pin cable to the HART modem.
c. Connect one end of the BNC cable to the HART modem.
d.Connect the mini-grabber cable to the other end of the BNC
cable.
e. Open the cover above the side marked Field Terminals, and
connect the mini-grabbers to the two Model 3095FT terminals
marked COMM as shown in Figure 4-2.
2. Power on the computer.
3. Type win return at the DOS prompt.
4. Double click on the Model 3095FT User Interface icon.
5. If password security is enabled, the User Interface Login menu
appears:
6. Enter a password and press Return. The status bar then reflects
the security level as determined by the entered password:
SL3 System Administrator SL1 Operator Access
SL2 Maintenance Access SL0 View Process Variables
SL(Disabled) Security Disabled
Explosions can cause death or serious injury. Before
making any computer connections, ensure that the Model
3095FT area is non-hazardous.
Explosions can cause death or serious injury. Do not
remove the instrument cover in explosive atmospheres
when the circuit is alive.
3
095
-30
9
5
002
6