Fisher-Rosemount 3095FT, Manual

Page: 180 / 184

Rosemount Model 3095FT HART Flow Transmitter
G-2
129 ($81) 08 10 ($0A) write materials of construction sec. 3.2, pg. 25
144 ($90) 06 08 write sensor trim slope point sec. 4.3, pg. 44
145 ($91) 06 08 write offset trim slope point sec. 4.3, pg. 45
152 ($98) 01 12 ($0C) read sensor trim points sec. 4.3, pg. 46
159 ($9F) 01 03 use ‘default’ (factory set) values sec. 4.3, pg. 46
160 ($A0) 01 03 start or stop data logging sec. 4.9.1, pg. 58
161 ($A1) 01 03 clear logging memory sec. 8.0, pg. 77
162 ($A2) 05 07 set start of sequential log read sec. 6.0, pg. 74
163 ($A3) 04 7 <= n
<= 240 read sequential log data sec. 6.0, pg. 75
164 ($A4) 00 08 read present time and date sec. 4.8, pg. 56
165 ($A5) 06 08 write present time and date sec. 4.8, pg. 56
167 ($A7) 01 03 write user message code to event log sec. 3.2, pg. 23
170 ($AA) 00 02 start on line maint. mode with PVs at
‘default’ value sec. 4.9.2, pg. 60
171 ($AB) 00 02 start on line maint. mode with 1 sec.
avg. PVs sec. 4.9.2, pg. 60
172 ($AC) 15 ($0F) 17 ($11) start on line maint. mode with
user-entered PVs sec. 4.9.2, pg. 61
173 ($AD) 15 ($0F) 17 ($11) write PVs ‘default’ (pre-determined)
values sec. 4.5, pg. 50
174 ($AE) 00 17 ($11) read PVs ‘default’ (pre-determined)
values sec. 4.5, pg. 51
176 ($B0) 01 03 + n read indexed flow parameter sec. 2.0, pg. 13
177 ($B1) 01 + n 03 + n write indexed flow parameter sec. 2.0, pg. 15
178 ($B2) 00 17 ($11)) read sensor full scale values sec. 5.0, pg. 69
179 ($B3) 00 10 ($0A) read compressibility and discharge coeff sec. 5.0, pg. 70
183 ($B7) 01 07 read indexed damping value sec. 4.4, pg. 48
184 ($B8) 05 07 write damping sec. 4.4, pg. 47
185 ($B9) 03 05 write HART
®
units codes for PVs sec. 4.0, pg. 27
TABLE G-1. Model 3095FT Flow Transmitter HART Commands.
HART
Command
No.
BYTCNT
RESP
BYTCNT
Description
HART Master
Document
Location