Fidelity Measurement AFM18, Operation Manual

Page: 72 / 78

71
www.fi-measurement.com
Appendix B: - Bi-Directional Communication Commands
Comport used for bi-directional communication propose must be assigned for
bi-directional communication purpose. Refer to Appendix A for setting
information.
Direct Control commands and information request commands can be sent to
this instrument through any standard communication programs like Hyper
Terminal, which comes with most of the Windows operating system in
computer.
A. Direct Control Commands
60
(F18 = Mode 1, 2 And 4)
Equivalent direct control commands for each of the key on panel from
computer are shown below.
Note: -
There is no direct control command to simulate the [ON/OFF] key on panel.
Thus, power on and off this instrument must be done through key the [ON/OFF]
key on panel.
B. Information Request Commands (F18 = Mode 4)
Operation data are available by sending information request commands to this
instruction.
60
Direct Control Commands to be transmitted to this instrument are not case sensitive.