Fidelity Measurement AFM18, Operation Manual

Page: 19 / 78

18
www.fi-measurement.com
5. Initial Setup
5.1 Internal Settings
Application parameters can be checked and set through internal functions.
Refer to 5.4 for description of all internal functions.
5.2 How to Enter & Select Internal Function
Follow the below steps to enter and select desired parameter of an internal
function.
a. Turn this instrument off and on again,
b. Press [TARE] during countdown,
c. Display F1 ,
d. This instrument is now in internal function,
e. Quick access to a function number
•
Press [1] to go to F10,
•
Press [2] to go to F20,
•
Press [6] to go to F60 (for dealer and authorized personnel only),
•
Press [8] to go to F80 (for dealer and authorized personnel only),
•
Press [9] to go to F99 (for dealer and authorized personnel only),
•
Press [0] to go to F1.
5.3 Key Function during Internal Function Mode
•
[M+] = Enter, save and return,
•
[ZERO] = Quit without saving,
•
[FUNC] = Go next,
•
[UNIT] = Go previous,
•
[CE] = Clear,
•
[TARE] = Go to internal function during power on countdown, or set F1
value being shown to zero and to display the net span gain by applying
additional load applied.