Fidelity Measurement AFM18, Operation Manual

Page: 30 / 78

29
www.fi-measurement.com
6.6 Function Modes
This instrument is equipped with the below function modes: -
•
Piece Count,
•
Percentage,
•
Animal weighing (When F11 = on),
•
Checkweighing (HI/LO check) for above functions.
6.7 To Enter & Quit from Supplementary Function Mode
6.7.1 To Enter a Function Mode
Press [FUNC] to shift among Piece Count (CoUnt) , Percentage (PErCnt) ,
Animal weighing (Ani) modes and then press [M+] to enter when the desired
mode name is being displayed.
6.7.2 To Enter & Quit from a Function Mode
•
To change enter a specific supplementary function mode, press [FUNC]
until the desired supplementary function mode appears. Then press [M+]
to enter,
•
To quit from a supplementary function mode, press [FUNC] followed by
[ZERO] .
6.8 Piece Count Function
16
Follow the below steps to enter Piece Count Function: -
a. Refer to 6.3 on how to select the desired weight unit,
b. If a container is used, place it onto the platform and press [TARE] ,
c. Press [FUNC] to shift among various functions until Piece Count (CoUnt)
appears,
d. Press [M+] to enter,
e. Default
17
sample size and PCS INDICATOR appear.
f. The instrument is now in Piece Count Function .
g. Refer to 6.8.1 for subsequent operation procedures.
16
Piece Count Function Mode does not support memory accumulation (M+) function.
17
Default sample size value = 50 pieces.