Fidelity Measurement AFM18, Operation Manual

Page: 65 / 78

64
www.fi-measurement.com
9.2.1 Label Programing Information Table
Prompt
Command
55
Description
Working
Mode
56
Suggested
Length
K Date of printing All 10
L Time of print All 8
M No. of accumulated transaction
Normal
Weighing
7
N Total accumulated weight
Normal
Weighing
9
O Net weight All 10
P Tare weight All 10
Q Gross weight All 10
R HI limit
57
Note A 10
S LO limit
58
Note A 10
T Comparison Result All 11
U Number of piece Counting 10
V Average piece weight Counting 9
W Reference mass (100%) Percentage 9
X Percentage value Percentage 10
Y Weight Hold (Animal weighing)
Animal
Weighing
9
Note A: - Good for all except animal weighing mode.
55
Commands must be in capital letter.
56
"All" means the information is good for all working modes.
57
Each working mode has its own Hi Limit format (weight for weighing mode; pieces for counting
mode; % for percentage mode. If Hi Limit has to be printed, set Hi Limit value under the
preferred working mode.
58
Each working mode has its own Lo Limit format (weight for weighing mode; pieces for counting
mode; % for percentage mode. If Hi Limit has to be printed, set Hi Limit value under the
preferred working mode.