Fidelity Measurement AFM18, Operation Manual

Page: 63 / 78

62
www.fi-measurement.com
9. Label Printing (LP-50 or Compatible)
This instrument supports label printing by LP-50 and any LP-50 compatible
label printers. Contact your dealer for more information about label printers.
Comport used to connect with the label printer must be assigned for
bi-directional communication; otherwise no printout will be generated. Refer to
Appendix A for setting information.
Set all preferred operation parameters according to F18 listed on 5.4 Internal
Function Table .
Cautions: -
1. Always design independent labels for different working modes. Do not
combine data of different working modes on the same label.
2. Do not print any labels of non-current working mode. This will retrieve
wrong data of non-current working mode.
3. Print only label data when the same working mode is in operation.
4. Do not combine data of various working modes on same label. This will
retrieve wrong data of non-current working mode.
9.1 Label Format Groups & Label File Names
2 label format groups are available, these are For 1 (label format group 1) and
For 2 (label format group 2).
9.1.1 For 1 (Label Format Group 1)
For 1 (format group 1) is for current transaction data printing (during normal
working status).
In order to trigger the right label to be printed, label files stored in printer for
this format group 1 must have a file name of AA1.dlb, AA2.dlb, AA3.dlb,
AA4.dlb and AA5.dlb.
In this instrument, 5 printout selections are available in format group 1: -
•
For 1 1: - Select this to print label file AA1.dlb stored in printer.
•
For 1 2: - Select this to print label file AA2.dlb stored in printer.
•
For 1 3: - Select this to print label file AA3.dlb stored in printer.