Fidelity Measurement AFM18, Operation Manual

Page: 29 / 78

28
www.fi-measurement.com
6.5 Memory Accumulation Function
6.5.1 To Accumulate a Transaction to Memory
11 12 13
a. Press [M+]
14
to save and accumulate data of current transaction to
memory,
b. This instrume
nt displays “ ≡ n ”.
M+ INDICATOR appears to indicate that
memory contains stored data. “ ≡ n ” means the total number of
transactions accumulated to memory,
c. This instrument returns to normal display status after 2 seconds,
d. Repeat a to c for subsequent transactions
15
,
Note: -
Unstable weight cannot be accumulated to memory. If [M+] is pressed when
weight reading is not unstable, this instrument will reject this command and
response with 3 beeps.
6.5.2 Memory Recall and Clearance
a. Press [MR] to recall total accumulated weight from memory,
b. After [MR]
is pressed, This instrument displays “ ≡ n ”
( n means the
number of transactions accumulated) follow by the total accumulated
weight stored in memory,
c. At this point: -
•
Press [ZERO] to quit, or
•
Press [ZERO] followed by [CE] to clear memory and return operation.
M+ INDICATOR disappear to indicate no data is stored in memory.
11
Memory Accumulation Function support weighing function only.
12
Weight less than 20d (or 20d1 for dual range) will not be accumulated to memory.
13
All data stored will be erased when this instrument is powered off.
14
Or press [PRINT] if F17 is = ON.
15
Weight must return to or below zero to enable another weight accumulation.