Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 242 of 254
11.2.24 +CSCON, Signalling Connection Status
The set command controls the presentation of an unsolicited result code +CSCON. If <n>=1, +CSCON:
<mode> is sent from the MT when the connection mode of the MT is changed. If <n>=2 and there is a
state within the current mode, +CSCON:<mode>[,<state>] is sent from the MT. When the MT is in UTRAN
or E-UTRAN, the mode of the MT refers to idle when no PS signalling connection and to connected mode
when a PS signalling connection between UE and network is setup. When the UE is in GERAN, the mode
refers to idle when the MT is in either the IDLE state or the STANDBY state and to connected mode when
the MT is in READY state. The <state> value indicates the state of the MT when the MT is in UTRAN
connected mode.
The read command returns the status of result code presentation and an integer <mode> which shows
whether the MT is currently in idle mode or connected mode. State information <state> is returned only
when <n>=2.
Test command returns supported values as compound value.
Command
Description
Set
[Function]
The set command controls the presentation of an unsolicited result code +CSCON.
[Syntax]
AT+CSCON=[<n>]
[Response/Action]
OK
or
+CME ERROR: <err>
Read
[Function]
The read command returns the status of result code presentation and an integer
<mode> which shows whether the MT is currently in idle mode or connected mode.
[Syntax]
AT+CSCON?
[Response/Action]
+CSCON: : <n>,<mode>[,<state>]