Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 101 of 254
Command
Description
AT+CMGR=1
+CMGR: 0,,23
0791 07917952140230F2040C917952446505430004502032110201800441424344
OK
AT+CMGR=14
+CMGR: 0,,25
079179521201009506BC0B917952428600F0508030807512805080308075128046
// SMS-STATUS-REPORT message in PDU mode
OK
AT+CMGF=1
OK
AT+CMGR=14 // SMS-STATUS-REPORT message in Text mode
+CMGR: "REC READ",6,188,"+97252468000",145,"05/08/03,08: 57:
21+08","05/08/03,08: 57: 21+08",70
OK
Reference
3GPP TS 27.005
6.1.16 +CMSS, Send Message from Storage
This command sends a pre-stored message, written previously using the +CMGW command. The <da>,
<toda> parameters are optional. If a DA is given, the message is sent to that address. Otherwise the
message is sent to the DA it was stored with (if any was entered). If no DA is found, an error occurs.
When the given index is an incoming message index the header settings will be as follows:
<first-octet> will be SMS-SUBMIT and VPF - relative.
The TP-RP and TP-UDHI settings will be taken from the incoming message's first octet.
<vp> - will be set to the default value -167 - as defined in 03.40.
<sca>,<tosca>, <pid> and <dcs> will be set according the incoming message parameters.
If <da> and/or <toda> are not given by the command, the <oa> and <tooa> will be set instead.
Note:
Any character sent by TE to Modem before Modem has reported a result of AT+CMSS operation,
will abort AT+CMSS command execution. However, if SMS was already sent to network and
sending operation was successful, the result of operation "+CMSS <mr>" will be reported by
Modem. If after aborting AT+CMSS command execution and before result of operation was
reported by Modem, a second AT+CMSS command is executed, then the result of the second
AT+CMSS operation only will be reported by Modem.
