Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 128 of 254
Command
Description
Parameters
<puk>
PUK code for unblocking a blocked phone
<pin>
Current PIN for unlocking a locked phone
<newpin>
New PIN (after changing or after entering PUK) 4 - 8 digits
<code>
READY MT is not pending for any password
SIM PIN MT is waiting SIM PIN to be given
SIM PUK MT is waiting SIM PUK to be given
PH-SIM PIN MT is waiting phone-to-SIM card password to be given
PH-FSIM PIN MT is waiting phone-to-very first SIM card password to be given
PH-FSIM PUK
MT is waiting phone-to-very first SIM card unblocking password to
be given
SIM PIN2
MT is waiting SIM PIN2 to be given (this <code> is recommended to be
returned only when the last executed command resulted in PIN2 authentication failure (i.e.
+CME ERROR: 17); if PIN2 is not entered right after the failure, it is recommended that
MT does not block its operation)
SIM PUK2
MT is waiting SIM PUK2 to be given (this <code> is recommended to
be returned only when the last executed command resulted in PUK2 authentication failure
(i.e. +CME ERROR: 18); if PUK2 and new PIN2 are not entered right after the failure, it is
recommended that MT does not block its operation)
PH-NET PIN MT is waiting network personalization password to be given
PH-NET PUK MT is waiting network personalization unblocking password to be given
PH-NETSUB PIN MT is waiting network subset personalization password to be
given
PH-NETSUB PUK MT is waiting network subset personalization unblocking
password to be given
PH-SP PIN
MT is waiting service provider personalization password to be given
PH-SP PUK MT is waiting service provider personalization unblocking password to
be given
PH-CORP PIN
MT is waiting corporate personalization password to be given
PH-CORP PUK
MT is waiting corporate personalization unblocking password to
be given
SIM PIN AT+CPIN=<pin>
SIM PUK AT+CPIN=<puk>,<newpin>