Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 120 of 254
Command
Description
OK
or
+CME ERROR: <err>
Read
N/A
Test
[Function]
Test command returns values supported as a compound value.
[Syntax]
AT+CUSATA=?
[Response/Action]
+CUSATA: (list of supported <activation>s)
OK
Parameters
<activation>
Is an integer type.
0 Return status information only, in information response:
+CUSATA: <UICC_state>[,<additional_profile_support>].
1 Enable TE profile facility handling only, no profile download. This action can only
be used if the combined TE and MT profile was downloaded during start-up (setting
+CUSATD=1).
2 Download MT default profile.
3 Download the combined TE and MT profile (merger of the profiles written by +CUSA
TW) an enable TE profile facility handling. The rules for merging profiles are defined in
3GPP TS 31.111 [92].
<UICC_state>
Is an integer type. Parameter reports that the UICC entered a new state during
start-up
or that the UICC ended startup and entered active state.
1 UICC start-up halted and ready for profile download. This state is reached if +CU
SATD=2 was issued before restart. UICC start-up will continue upon +CUSATA=2 or
+CUSATA=3.
2 Profile download completed, UICC startup continuing.
3 UICC awaiting PIN verification.
4 UICC active.
