Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 204 of 254
Command
Description
OK
AT+CGPADDR=1
+CGPADDR: 1,”0.0.0.0”
OK
Reference
3GPP TS 27.007
11.2.9 +CGANS, Manual response to a network request for PDP
context activation
This command requests the MT to respond to a network request for Packet Domain PDP context
activation which has been signaled to the TE by the RING or +CRING unsolicited result code
Note:
This is not the same as if the MT issues a +CGDATA (or +CGACT) command after receiving a
+CRING unsolicited result code. A +CGDATA (or +CGACT) does not command the MT to
acknowledge the network request but rather to make a new request for context activation. The
network request would be ignored.
Command
Description
Set
[Function]
The set command requests the MT to respond to a network request for Packet Domain
PDP context activation which has been signalled to the TE by the RING or +CRING
unsolicited result code.
[Syntax]
AT+CGANS=[<response>,[<L2P> ,[<cid>]]]
[Response/Action]
OK
Or
CME ERROR : <error>
Read
N/A
Test
[Function]
The test command returns the values of <response> and <L2P> supported by the MT
