Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual
Page 211 of 254
Command
Description
AT+CGEQMIN=…,32, …) (refer 3GPP TS 24.008 subclause 10.5.6.5).
<Delivery order> A numeric parameter that indicates whether the UMTS bearer shall
provide in-sequence SDU delivery or not.
0 no
1 yes
Other values are reserved.
<Maximum SDU size>
A numeric parameter (1,2,3,…) that indicates the
maximum allowed SDU size in octets(refer 3GPP TS 24.008 subclause 10.5.6.5).
<SDU error ratio> A string parameter that indicates the target value for the fraction of
SDUs lost or detected as erroneous. SDU error ratio is defined only for conforming
traffic. The value is specified as ‘mEe’. As an example a target SDU error ratio of
5•10-3 would be specified as ‘5E3’ (e.g. AT+CGEQMIN=…,”5E3”,…) (refer 3GPP
TS 24.008 subclause 10.5.6.5).
<Residual bit error ratio> A string parameter that indicates the target value for the
undetected bit error ratio in the delivered SDUs. If no error detection is requested,
Residual bit error ratio indicates the bit error ratio in the delivered SDUs. The value is
specified as ‘mEe’. As an example a target residual bit error ratio of 5•10-3 would be
specified as ‘5E3’ (e.g. AT+CGEQMIN=…,”5E3”,…) (refer 3GPP TS 24.008 subclause
10.5.6.5).
<Delivery of erroneous SDUs> A numeric parameter that indicates whether SDUs
detected as erroneous shall be delivered or not.
0 no
1 yes
2 no detect
Other values are reserved.
<Transfer delay> A numeric parameter (0,1,2,…) that indicates the targeted time
between request to transfer an SDU at one SAP to its delivery at the other SAP, in
milliseconds (refer 3GPP TS 24.008 subclause10.5.6.5).
<Traffic handling priority> A numeric parameter (1,2,3,…) that specifies the relative
importance for handling of all SDUs belonging to the UMTS bearer compared to the
SDUs of other bearers (refer 3GPP TS 24.008 subclause 10.5.6.5).
<Source Statistics Descriptor> Supported in R7 P S a numeric parameter that
specifies characteristics of the source of the submitted SDUs for a PDP context. This