Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 95 / 232

3. Overview and connecting technology I/O modules
3−25
Festo P.BE−CPX−EA−EN en 0705f
Dismantling Dismantle the sub−base as follows (see Fig.3/8):
1. Loosen the 4 screws in the relevant sub−base with
a Torx screwdriver size T10.
2. Pull the sub−base carefully and without tilting away from
the electrical plug connection of the electronic module.
Only in cases where the electronic module is to be removed:
·
Pull the electronic module carefully and without tilting
away from the contact rails of the manifold sub−base.
1
Sub−base
2
Screws
3
Electrical plug
connector
4
Electronic
module
5
Contact rails
6
Manifold
sub−base
1
2
3
4
5
6
Fig.3/8: Fitting/removing the I/O module (representation)