Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 87 / 232

3. Overview and connecting technology I/O modules
3−17
Festo P.BE−CPX−EA−EN en 0705f
Sub−bases CPX−AB−8−M8−3POL and −4POL
Note
In order that the completely fitted modules with sub−bases
CPX−AB−8−M8−3POL and −4POL comply with protection
class IP 65/IP 67:
·
use plugs and cables from the Festo range for connect
ing the sensors and actuators (see Appendix A.10).
·
Tighten the union nuts of the plugs at first by hand.
·
Seal unused sockets with protective caps type ISK−M8
(Accessories).
Sub−base CPX−AB−8−KL−4POL
The completely fitted sub−base CPX−AB−8−KL−4POL complies
with protection class IP 20.
Specifications of the cable terminals:
Cable cross−sectional area: 0.08 ... 1.5 mm
2
Max. current: see chapter A.6
Insulation removed: 5 ... 6 mm
Permitted copper conductors:
single wire, multi−wire, fine wire, also with tin−plated indi
vidual cores
Fine wire strands compressed
Fine wire with core end sleeves (sealed against gas,
crimped on)*)
Fine wire with pin cable socket (sealed against gas,
crimped on)*)
*) If necessary, use next smaller cross−sectional area