Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 58 / 232

2. MPA pneumatic modules
2−12
Festo P.BE−CPX−EA−E N en 0705f
Note that MPA electronic modules may only be supplied with
power via the following supply modules:
MPA electronic
module Permitted supply modules (type)
VMPA1−FB−EM S −...
VMPA2−FB−EM S −...
(in each case without
electrical isolation)
System supply module
CPX−GE−EV− S (M18 4−pin) or
System supply module
CPX−GE−EV− S −7/8− 4POL (7/8" 4−pin)
VMPA1−FB−EM G −...
VMPA2−FB−EM G −...
(in each case with
electrical isolation)
Valve supply modules
CPX−GE−EV− V ... (M18 or 7/8") or
System supply modules
CPX−GE−EV− S ... (M18 or 7/8")
1)
Intermediate electrical ssupply module
(supply plate (electric) type
VMPA−FB−SP−...−V−...)
1)
If a 4−pin system supply module is used, the electrical isolation
will no longer be effective.
Tab.2/3: Permitted supply modules modules for MPA
electronic modules
In the case of MPA electronic modules with electrical isolation
type VMPA1−FB−EM G −... or VMPA2−FB−EM G −..., V
EL/SEN
and
V
VAL
are completely electrically isolated. In conjunction with
the following voltage supply modules, it is therefore possible
to switch off the valve supply voltage at all poles:
Manifold sub−base with valve supply type CPX−GE−EV− V ...
(M18 or 7/8")
7/8" manifold sub−base with 5−pin system supply module
type CPX−GE−EV
− S−7/8− 5POL
Intermediate electrical supply module (supply plate
(electric) type VMPA−FB−SP−...−V−...)