Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 203 / 232

A. Technical appendix
A−13
Festo P.BE−CPX−EA−E N en 0705f
A.5 Technical specifications of the multi I/O modules
Technical specifications CPX−8DE−8DA
General technical specifications of the
CPX terminal See CPX system manual
Protection class as per EN 60 529 See technical specifications for the sub−base fitted
Operating voltage supply for elec
tronics/sensors (V
EL/SEN
)
Rated voltage
Internal current consumption at 24 V
(internal electronics, all outputs
0−signal)
24 V DC ± 25 %
type. 22 mA
Load voltage supply for outputs (V
OUT
)
Rated voltage
Internal current consumption at 24 V
(internal electronics)
Diagnostic message undervoltage
V
OUT
(monitoring V
OUT
, load voltage
outside function range)
24 V DC ± 25 %
type. 34 mA
Ţ
17 ... 14 V
Digital inputs
Design
Logic level:
logical 1
logical 0
Response delay at 24 V
Current consumption at 24V (input
current)
Sensor supply: Voltage drop to
V
EL/SEN
(reduction of sensor supply
voltage)
Protection against incorrect polarity
24 V
OUT
against 0 V
SEN
Short circuit protection in sensor
supply (for the complete module)
Response threshold
Characteristic
8 inputs as per IEC 1131, type 2, 24 V
0 ... 30 V DC, positive logic (PNP)
ţ
11 V
Ţ
5 V
can be parametrized, type. 3 ms
with log. 1": typ. +9.3 mA
max. 0.7 V
Yes
electronic
0.7 A ... 2.4 A
slow−blowing
Electrical isolation of inputs none