Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 193 / 232

A. Technical appendix
A−3
Festo P.BE−CPX−EA−E N en 0705f
A.1 Technical specifications of the pneumatic interfaces
Technical specifications CPX−GP−03−4.0 CPX−GP−CPA−...
General technical specifications of the
CPX terminal See CPX system manual
Protection class as per EN 60 529 IP65, in fitted state
Operating voltage supply for elec
tronics/sensors (V
EL/SEN
)
Rated voltage
Internal current consumption at 24 V
(internal electronics)
24 V DC ± 25 %
type. 15 mA
Load voltage supply for valves (V
VAL
)
Rated voltage
Internal current consumption at 24 V
(internal electronics, without valves)
Diagnostic message undervoltage
V
VAL
(monitoring V
VAL
, load voltage
outside function range)
24 V DC ± 10 %
type. 30 mA
Ţ
21.6 ... 21.5 V
24 V DC +10 %/−15%
type. 30 mA
Ţ
19.8 ... 19.6 V
Digital outputs (valve solenoid coils)
Rated load voltage
Intended for connecting to pneu
matics
Short circuit protection at valve out
put
Monitoring wire fracture (open load)
max. 26 outputs
V
VAL
Midi/Maxi (type 03)
Yes (electronic),
Response threshold > 1.0 A
No
max. 22 outputs
V
VAL
CPA (type 12)
Yes (electronic),
Response threshold > 1.0 A
Can be parametrized
Isolation tested with 500 V DC
Electrical isolation
between the channels
(valve solenoid coils)
between the operating voltage sup
ply for the electronics/sensors
(V
EL/SEN
) and the load voltage for the
valves (V
VAL
)
none
With power supply via manifold sub−base type:
CPX−GE−EV−S: none
CPX−GE−EV−S−7/8−
5 POL: Yes
CPX−GE−EV−V...: Yes
Module code [type code] (CPX−specific)
Module identification (Handheld) 67
TYPE3 66
CPA10/14