Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 201 / 232

A. Technical appendix
A−11
Festo P.BE−CPX−EA−E N en 0705f
Technical specifications CPX−8DA−H CPX−8DA CPX−4DA
Voltage drop at output
Output delay with ohmic load
signal change 0" to 1"
signal change 1" to 0"
Parallel switching of outputs for in
creased performance
Ţ
1 V
< 200 s
< 200 s
Yes, max. 4 outputs of the same
module:
Ţ
1 V
< 200 s
< 200 s
not permitted
A0 ... A3 A0 ... A3 / A4 ...
A7
Protection against reverse voltage
Limiting the inductive switch−off volt
age of connected coils/solenoid
valves
max. V
OUT
type. −16 V
Electrical isolation
between the channels
between the operating voltage sup
ply for the electronics/sensors
(V
EL/SEN
) and the load voltage for the
outputs (V
OUT
)
none
Yes, with power supply via manifold sub−base type:
CPX−GE−EV−Z (M18)
CPX−GE−EV−S−7/8−5POL
CPX−GE−EV−Z−7/8−5POL
CPX−GE−EV−Z−7/8−4POL
Isolation tested with 500 V DC
Module code [type code] (CPX−specific)
Module identification (Handheld) 3
4DO 6
8DO 17
8DO−H