Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 92 / 232

3. Overview and connecting technology I/O modules
3−22
Festo P.BE−CPX−EA−EN en 0705f
Sub−base CPX−AB−4−M12−8POL
Note
In order that completely fitted modules with sub−base
CPX−AB−4−M12−8POL comply with protection class
IP 65/IP 67:
·
use cable type KM12−8GD8GS−2−PU from Festo for con
necting the cylinder−valve combination type DNCV or
other sensors and actuators (see AppendixA.10)
·
Tighten the union nuts of the plugs at first by hand.
·
Seal unused sockets with protective caps type ISK−M12
(Accessories).
Screening plate type CPX−AB−S−4−12
Sub−base CPX−AB−4−M12−8POL can be combined with a
screening plate. This can be ordered separately as an acces
sory.
Instructions on subsequent fitting of the screening/shield
plate can be found in section 3.3.2.
Instructions on using the screening plates can be found with
sub−base CPX−AB−4−M12x2−5POL.