65
Crease the paper thoroughly, then unfold. (see printed page for details on folding)
Repeat the process, but this time fold the paper so that the letter B’s meet, being
sure to keep the edges of the paper as even as possible.
Crease the paper thoroughly, then unfold. (see printed page for details on folding)
Locate where the Vertical (up and down) crease crosses the “A” line, and enter
the number into the calibration screen for your “A” value.
Locate where the Horizontal (left and right) crease crosses the “B” line, and enter
the number into the calibration screen for your “B” value.
Click Done. You have now calibrated your printer.
Click Print to print your label.
Click Close to return to the New Project Wizard.
For instructions on applying the label to the CD, please refer to Chapter 9.
Saving Your Label
In order to save any label created in the New Project Wizard, you must first open it in the
MediaFACE® 4.01 Advanced Interface. However, once you choose to open your project
in the Advanced Interface level, you will not be able to reopen it in the New Project
Wizard.
To access the Advanced Interface, simply click the Finish button. This will close the New
Project Wizard and automatically open your label design in the Advanced Interface. Once
opened, you can choose to save your label or continue editing your design. To save your
label, select File>Save and enter a filename. For more information on saving projects,
please refer to Chapter 7 of this manual. For more information on working in the
Advanced Interface, please refer to the remaining sections in this chapter.
