47
Chapter 5: Creating a Label
We will now design a label using the Advanced Mode of MediaFACE® 4.01. There are
two options available when creating a label in the Advanced Mode. We can either use the
New Project Wizard or work directly in the Advanced Interface. First, we will run
through designing a label using the New Project Wizard. In the Advanced Mode section
later in this chapter, we will run through an example working directly in the Advanced
Interface. The first section, Selecting a Project Template, includes important information
that applies to both design options.
When you first open the MediaFACE® 4.01 application, you will be presented with the
screen shown below:
Figure 5.1 – New Project Wizard opening screen
This is the Select Project Template screen for MediaFACE® 4.01, and also the opening
screen for the New Project Wizard. After selecting a template here, you can choose to run
your project through the New Project Wizard or to work directly in the Advanced
Interface. Template options and a description for each are included in the next section
and apply to both design options.
