Feider Machines FRT7550M, Original Instruction

Page: 21 / 63

21
OPERATION
HANDLING ADVICE
1. Check that the blade rotation control is correctly adjusted so that the
blade(s) can be easily disengaged.
2. Before using the unit, check the oil level in the dipstick and add more
if needed.
3. If the unit does not start, first make sure that the battery is connected.
4. Make sure that all belts are inserted into the guide arms. See
instructions for mower rudder and belts.
5. Before performing any check, adjustment (except for the carburettor)
or repair, be sure to disconnect.
6. To ensure a longer battery life on electrically powered models,
charge the battery every three months.
7. Use gear shifting and not accelerator control to change gears.
8. The belts may wrinkle when the blade or clutch is engaged. This
wrinkle is normal and does not affect the operation of the device.
_________________________________________________________________
TIPS FOR MOWING AND BAGGING
1. For an even more beautiful lawn, check the cutting level of the
mower's frame. See "Levelling the mower frame" in the Maintenance
section.
2. To ensure that the mower frame cuts in levelled mode, make sure the
tire pressure is correct.
3. Check the blade every time you use the unit. If it is bent or damaged,
replace it immediately. Also, make sure that the nut holding the blade is
firmly screwed in.
4. Keep the blade(s) sharp. Worn blades make the grass tip turn brown.
5. Do not mow or catch wet grass. Wet grass does not discharge easily.
Let the grass dry before mowing.
6. Use the left side of the mower frame to cut close to objects.
7. Discharge the cut grass onto the mown surface. This makes
discharge more regular.
8. When mowing large areas, start by turning to the right so that the cut
grass is dumped away from shrubs, fences, driveways, etc. After one or
two turns, mow in the opposite direction to the left until you finished the
work (Figure 13).
9. If the grass is very high, mow twice to reduce the engine load. First
mow with the frame in raised position and then lower it during the
second cut.
10. For better engine performance and regular discharge of mown
grass, always work with the accelerator in FAST position.
11. When using the grass catcher system, work with the accelerator in
FAST position and the gear change in first or second gear.
12. For better performance and cutting quality, mow with the gearshift
engaged at one of the slowest speeds.
13. After each use, clean the upper and lower parts of the frame for
better performance. Similarly, a clean frame helps preventing fire
hazards.